ar empires logo
Property & Land Tool

Land & Area Converter

Convert property and land area between square meters, square feet, square yards, acres, hectares and regional units. For marla and bigha, the tool shows the measurement standard instead of assuming one value applies everywhere.

Standard units from published references Regional assumptions are shown

Quick answer

Choose any supported From and To units below.

Reviewed 20 September 2026. Sources and regional assumptions are listed on this page.

Area converter

Enter an area, choose the units and get the converted value instantly.

Free · no sign-up

Converted area

10.76391 ft²

1 m² → Square Feet

For regional units, the selected standard is part of the result. For legal or registered property records, follow the measurement used by the relevant authority or document.

Built for property area

One calculator, clear standards

Standard units use published conversion factors. Regional units are treated differently: the calculator asks for the relevant marla or bigha standard where the value can change by local convention. This keeps the result useful without presenting a regional assumption as a universal fact.

Sources & method

How AR Empires checks conversion factors

For standard international units, the calculator uses published measurement references. For regional land units, the page identifies the selected convention and links to government or land-record material where available. A calculator result should not replace the measurement written on a registered property record.

Conversion directory

Browse every dedicated area conversion calculator

Square Meter to Square Feet Converter

1 square meter equals 10.7639104167 square feet. Multiply square meters by 10.7639104167 to convert m² to ft².

Open converter

Square Feet to Square Meter Converter

1 square foot equals exactly 0.09290304 square meter using the international foot. Multiply ft² by 0.09290304 to get m².

Open converter

Square Feet to Gaj Converter

In this area calculator, 1 gaj means 1 square yard, which equals 9 square feet. Divide square feet by 9 to convert ft² to gaj.

Open converter

Gaj to Square Feet Converter

For area measurement, 1 gaj equals 1 square yard, or 9 square feet. Multiply gaj by 9 to convert it to ft².

Open converter

Acre to Square Feet Converter

1 acre equals exactly 43,560 square feet using the international foot definition.

Open converter

Square Feet to Acre Converter

1 square foot equals 1/43,560 acre, or about 0.00002295684 acre.

Open converter

Hectare to Acre Converter

1 hectare equals approximately 2.4710538147 acres using the international-foot acre.

Open converter

Acre to Hectare Converter

1 international-foot acre equals 0.40468564224 hectare.

Open converter

Cent to Square Feet Converter

1 cent is one-hundredth of an acre, so it equals 435.6 square feet.

Open converter

Square Feet to Cent Converter

To convert square feet to cents, divide the area by 435.6. One square foot is about 0.002295684 cent.

Open converter

Marla to Square Feet Converter

Using the Punjab revenue standard documented in the Punjab Land Records manual, 1 marla equals 272.25 square feet. Some housing schemes use 250 or 225 sq ft, so choose the correct standard in the calculator.

Open converter

Square Feet to Marla Converter

Using the Punjab revenue standard, divide square feet by 272.25 to get marla. If your housing scheme uses 250 or 225 sq ft per marla, select that standard first.

Open converter

Kanal to Square Feet Converter

Under the Punjab revenue standard, 1 kanal equals 20 marla or 5,445 square feet. Scheme-based 250 or 225 sq ft marla standards produce different kanal areas, so select the right standard.

Open converter

Square Feet to Kanal Converter

Using the Punjab revenue standard, divide square feet by 5,445 to convert the area to kanal. The result changes if a scheme uses a 250 or 225 sq ft marla standard.

Open converter

Marla to Square Yard Converter

Under the Punjab revenue standard, 1 marla equals 30.25 square yards. A 250 sq ft marla equals about 27.7778 sq yd, while a 225 sq ft marla equals 25 sq yd.

Open converter

Kanal to Acre Converter

Under the Punjab revenue standard, 8 kanal equal 1 acre, so 1 kanal equals 0.125 acre. The relationship changes if a private scheme uses a different nominal marla size.

Open converter

Acre to Kanal Converter

Under the Punjab revenue standard, 1 acre equals 8 kanal, or 160 marla. If a private scheme uses a different nominal marla size, its acreage comparison can differ.

Open converter

Bigha to Acre Converter

Bigha does not have one universal acre value. For example, the historic Western Punjab measure documented by PLRA describes a bigha as half an acre, while other regions use different bigha sizes. Choose the region before relying on the result.

Open converter

Acre to Bigha Converter

There is no single acre-to-bigha conversion for every region. Under the historic Western Punjab measure selected by default, 1 acre equals 2 bigha; other regions use different values.

Open converter

Murabba to Acre Converter

In Punjab settlement-square usage, a murabba is commonly treated as a 25-acre survey square. On that basis, 1 murabba equals 25 acres.

Open converter

Useful AR Empires resources

From area checks to property research

Frequently asked questions

Questions about area conversion

What units can the AR Empires area converter handle?

The tool converts square meter, square feet, square yard, acre, hectare, gaj, cent, marla, kanal, bigha and murabba. Standard international units use fixed conversion factors, while regional land units show the measurement convention used for the calculation.

Why does the tool ask for a standard for marla or bigha?

Those regional units are not fixed everywhere. A marla can be marketed at different nominal square-foot sizes, and bigha varies substantially by region. The selector makes the assumption visible before the calculation is used.

Can I use these results for a legal property document?

Use the calculator for conversion and checking, but legal records should follow the unit, standard and precision used by the relevant land authority, approved plan or registered document.

How accurate is the AR Empires area converter?

The calculator uses fixed conversion factors for standard units and keeps more precision internally than it displays. Regional units such as marla and bigha need the correct local standard, so check the selected standard before using a result for a property document or transaction.

Last reviewed: 20 September 2026. Conversion pages are informational tools; verify regional land standards against the relevant authority or property document when accuracy has legal or financial consequences.